Office 2010 KMS activation Error: 0xC004F074

Run following Exe:

C:\Program Files\Common Files\microsoft shared\OfficeSoftwareProtectionPlatform\OSPPREARM.exe

Advertisements

Windows XP 0x0000000A Error

Find which windows error below, and to visit microsoft support help links to repair

  1. WinXP “Stop 0x0000000A” error message

    Stop: 0x0000000A (parameter1, parameter2, parameter3, parameter4)
    IRQL_NOT_LESS_OR_EQUAL
    *** Address
    x has base at xfilename”
    STOP 0x0000000A (0xBFD14AAC, 0x000000FF, 0x00000000, 0x8000F67C)
    IRQL_NOT_LESS_OR_EQUAL
    ***Address 8000f67c has base at 80001000 – hal.dll
    .” This
    error message problem occurs might when a driver uses an incorrect memory address.

  2. Windows XP “Stop 0x0000000A” When Fast Switch Between Users

    IRQL_NOT_LESS_OR_EQUAL
    Stop 0x0000000a (0x0227001d, 0x00000002, 0x00000000, 0x804eba3a)
    ” This problem caused might you install software and drivers that are provided by Netropa Corporation on the computer to add functionality to the multimedia keyboard.

  3. XP SP-2 “STOP 0x0000001a: MEMORY_MANAGEMENT” or “STOP 0x0000000a: IRQL_NOT_LESS_OR_EQUAL”

    This problem occurs because of a race condition in the memory manager.

  4. During XP Upgrade “Stop 0x0000000A Irql_Not_Less_or_Equal” Error Message

    This problem can occur if there is incompatible hardware or an incompatible device driver on your computer.

  5. Windows XP SP2 “STOP 0x0000000A” use two USB streaming-video cameras

    STOP 0x0000000A (Parameter 1Parameter 2Parameter 3Parameter 4) ” This problem cause might a race condition in the Usbcamd2.sys driver.

  6. Winxp “STOP 0x0000000A” Error Change from AC Power to DC Power

    When you change between AC power and DC power on your laptop computer, you may receive a “STOP 0x0000000A” error message on a blue screen. This problem caused might when you unplug or replug the power supply into the computer while it is in Standby mode, and then resuming.

  7. Windows Server 2003, XP & Vista 0x0000000A or 0x000000BE error use IEEE 1394-based scanner

    0x0000000A: IRQL_NOT_LESS_OR_EQUAL
    0x000000BE: ATTEMPTED_WRITE_TO_READONLY_MEMORY
    ” This problem occurs because of an issue with the Scsiscan.sys file.

  8. Windows Server 2003, 2000 & XP “STOP 0x00000050” or “STOP 0x0000000A” a diagnostic program immediately close

    *** STOP: 0x00000050 (0xffffff60, 0x00000000, 0x804fa26f, 0x00000000) PAGE_FAULT_IN_NONPAGED_AREA address 0x804fa26f in 0x50_nt!ObReferenceObjectSafe+e”
    “*** STOP: 0x0000000A (0xffffff94, 0x00000000, 0x00000000, 0x804e15ef) IRQL_NOT_LESS_OR_EQUAL address 0x804fa26f in 0xA_nt!ExpCopyThreadInfo+a
    “. This problem cause might the computer is infected with a variant of the Sdbot virus.


That is we find the informations to resolve your PC 0x0000000A blue screen errors, hope it is helpful to you, if you still haven’t repaired this errors, please contact microsoft support for further help.

 

source – windowsxpregistrycleaner.com

For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

 

Join us on facebook

http://www.facebook.com/pages/Compfaqz/178832208817415


 

How to Fix Your PC Error 0x490

Image representing Windows as depicted in Crun...

Image via CrunchBase

You may receive error message 0x490 when some hardware was faulty, pc freezing, blue screen and so on, this page contains some useful information to repair your windows 7 (or other windows systems) error code 0x490, if you fixed this error from this help article, please email us ( windowsxpregistrycleaner@gmail.com ) give your feedback, and we hope you can share this page to your friends if they need like you, thanks.

Failed, error code 0x490 Learn more…
Microsoft help links for error 0x490 Learn more…
PC repair tool for code 0x490 Learn more…
Failed, error code 0x490 Back to Top
  • This Error may occur in your windows 7/vista system.
  • How Fix?Those random issues are the worst! It could be a few things, but most of the time it is hardware. I had an older ThinkPad that did about the same thing…once in awhile it would not find the hard drive. I’m sure it was a controller issue as another hard drive didn’t fix the issue and both drives worked fine in another system.

    On another computer I had a 160GB drive appear to fail…several times. I was about to toss it. I deleted all partitions and ran a utility to fix bad sectors and perform a low level format. That was 4 years ago and it still works fine today.

    I would definitely make sure you save all your needed files just in case and make a full image of the system. That way if you did have a drive failure you could pop a new one in and be back up and running within an hour.

    In the meantime, if you can get into Windows and it work fine, I would run the Disk cleanup and drafrag utilities in the properties of your C: drive to make sure it is as good as it can be.

Microsoft help links for error 0x490 Back to Top
PC repair tool for code 0x490 Back to Top

source – windowsxpregistrycleaner.com

For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

 

Join us on facebook

http://www.facebook.com/pages/Compfaqz/178832208817415


Fix Your Vista Error Code 646

Learn how to fix error code 646 in windows vista system on this help guide page informations.

We have found windows error from microsoft support or answers help links to resolve

  • Questions & Error Message:
    Error Code 646 for Windows Vista” 

    When I try to install these updates, I get a error code 646. I have a Dell Inspiron 1501 laptop with Windows Vista.
    Security Update for Microsoft Office Visio Viewer 2007 (KB973709)
    Download size: 2.5 MB
    You may need to restart your computer for this update to take effect.
    Update type: Important
    A security vulnerability exists in Microsoft Office Visio Viewer 2007 that could allow arbitrary code to run when a maliciously modified web page is opened. This update resolves that vulnerability.

  • Answers:
    Windows Vista Home Premium – fix this problem

    The answer to the mystery of “Why the Windows Security updates do not install are:

    Go to: Start > Control Panel > CLICK User Accounts > Turn User Acct On or Off > WINDOW OPENS asking permission > CLICK Continue >
    UNCHECK the box “UAC Use user account control to help protect your computer.

    Go to: Start > Program > Windows Updates Install >

    Once the updates have been installed go back to the Control Panel > User Accounts > Turn User Acct On or Off > CHECK the box “UAC Use user account control to protect your computer.

    Restart

Computer That is we find the informations to fix code 646 problems                         inwindows vista, hope our page is helpful to you, if you still haven’t                     fixed this errors, please contact microsoft support for further help.

Courtesy – windowsxpregistrycleaner.com

For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

 

Join us on facebook

http://www.facebook.com/pages/Compfaqz/178832208817415


Fix Windows Error 80072F8F

You may receive error message 80072F8F when windows update, windows 7 installation…, this page contains some useful information to repair your computer error code 80072F8F.

Windows 7 – update error 80072F8F
  • When you try to update the windows 7 system, you may get the error below:“Windows update error code 80072F8F”

  • How fix?1. Click the Start, type timedate.cpl in the Start Search box, and then click Timedate.cpl on the programs list.

    2. On the Date and Time tab, make sure that the computer’s date and time are correct. If the settings are incorrect, click Change date and time .

    If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.

    3. In the Date and Time dialog box, use the following procedures:

    aTo change the date Under Date , click the left or right arrows to find the current month in the calendar, and then click the current date.

    bTo change the time Under Time , double-click the hour, minutes, or seconds that you want to change, and then click the arrows to increase or decrease the value.

    4. When you finish changing the date and time settings, click OK .

    5. Try to install updates again.

Microsoft help links for error 80072F8F
Fix PC tool for code 80072F8F
  • If you still haven’t fixed the windows 7 80072F8F problem:1. Please try the tool windows registry optimizer, it safely cleans PC errors & invalid entries cause slow speed, blue screen, deadlock errors and crashing, and repair registry problems to speedup your computer performances. It is easy to use. And you can scan your PC for free first!

    2. Some pc error is related to driver problems, Driver Update software is designed to quickly locate the most current drivers specific to your computer system, you can run a free scan for your pc driver update first.

source-http://www.windowsxpregistrycleaner.com

For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

 

Join us on facebook

http://www.facebook.com/pages/Compfaqz/178832208817415

Solution to Finder “Error code -36″ in 10.6 when copying folders

Solution to Finder

Users of Mac OS X Snow Leopard, specifically those running 10.6.2, are experiencing a widespread problem related to copying directories to Windows-formatted volumes in Finder.

I recently got a new USB flash drive and ran into a serious issue as I was loading it with data. Some of the files I temporarily copied to my Mac’s Desktop from my old flash drive would not successfully copy to the new one. Both flash drives were formatted as FAT volumes (known as MS-DOS in Disk Utility) and only files that resided in a folder seemed to be affected. I could copy the files individually just fine, but not an entire folder at once. Finder would have none of it.

If you’re running Mac OS X 10.6.2 and have a MS-DOS/FAT-formatted disk handy, here is a quick way to replicate the problem.

  1. Create a new folder on the MS-DOS drive with Finder and copy any file from your Mac right into that folder. It could be anything… I used a random image on my Desktop, for example.
  2. Copy the entire folder from the MS-DOS drive to your Mac’s Desktop.
  3. Copy the folder from your Desktop right back onto the MS-DOS drive.

Boom! You just got slapped with the following error, didn’t you? “The Finder can’t complete the operation because some data can’t be read or written. (Error code -36).” Every time, without fail, this has occurred on all Snow Leopard machines I’ve tried. Sure, you can reformat the USB flash drive to Mac OS Extended to get around the error, but that kills Windows compatibility. Instead, let’s dig deeper.

It turns out the problem stems from the “dot-underscore” companion files that Mac OS X’s HFS+ filesystem creates for files when they get moved to FAT16 or FAT32 volumes. These hidden files – which start with “._” followed by the original filename – contain extra information to go along with the main file’s data. Apparently things get screwy in 10.6.2 and don’t go well when folders from a Windows-compatible volume get moved to a Mac and then back again. The dreaded “Error code -36″ message is the result.

If you run into this horribly inconvenient bug, there is a temporary solution until Apple gets their act together. It involves stripping the main file of its unneeded dot-underscore buddy. Don’t worry, you won’t lose anything important in the process. Here’s what you can do:

  1. Launch Terminal (Applications > Utilities) and type the following command, making sure to include a space at the end:

    dot_clean

  2. Select the folder on your Mac that is giving you trouble and drag it right to the Terminal window. A green cursor with a + symbol should appear before you release the mouse.
  3. The path to that folder should have automatically appeared at the end of the Terminal command. For example, it might look like:

    dot_clean /Users/UserName/Desktop/Test_Folder

  4. Press Enter/Return to run the command. It will appear as if nothing happened, but try copying that folder to a MS-DOS volume now. Finder should magically allow it to be moved with no problem!
  5. Repeat the entire process as needed for other folders that won’t copy.

As you can see, this is not necessarily a major file or disk corruption issue. It is a pesky Snow Leopard bug that Apple will hopefully fix in the upcoming 10.6.3 update. In the meantime, this will allow users to copy and move files between drives as needed.

UPDATE – 4/4/10: Apple’s 10.6.3 update has indeed finally fixed this bug! If you installed the update and are still experiencing a Finder error, it’s likely you are suffering from a different issue that is beyond the realm of this article.

For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

 

Join us on facebook

http://www.facebook.com/pages/Compfaqz/178832208817415