Office 2010 KMS activation Error: 0xC004F074

Run following Exe:

C:\Program Files\Common Files\microsoft shared\OfficeSoftwareProtectionPlatform\OSPPREARM.exe

iPhone: After installing update, iPhone shows “Waiting for activation”

Symptoms

After updating to iPhone Software, you may see the following alert message on iPhone: “Waiting for activation.” This indicates that iPhone is attempting to communicate with the cell phone tower.

Products Affected

iPhone

Resolution

If this message is displayed for more than a few minutes, try moving to a different location. Note: If you are indoors, trying going outdoors or moving closer to a window. Verify you have  wireless coverage in your area.

For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

Join us on facebook

http://www.facebook.com/pages/Compfaqz/178832208817415

“Error 691” or “Error 734” When You Attempt to Establish a Dial-Up Connection in Windows XP

SYMPTOMS

When you attempt to establish a dial-up connection, you may receive an error message similar to one of the following:

Error 691: The computer you are dialing in to cannot establish a Dial-Up Networking connection. Check your password, and then try again.
-or-
Error 691: Access was denied because the username and/or password was invalid on the domain.
-or-
Error 734: The PPP link control protocol was terminated.

As a result, you cannot establish a dial-up connection.

CAUSE

This behavior can occur if any of the following conditions are true:

  • The Include Windows logon domain check box is selected in the Options tab of the dial-up connection’s Properties dialog box.
    -or-
  • An incorrect user name or password is used.
    -or-
  • The dial-up connection’s security option is incorrectly configured to use the Require secured password setting.

RESOLUTION

To resolve this behavior, follow these steps:

  1. Click Start, point to Connect To, and then click your dial-up connection.
  2. Click Properties, and then click the Options tab.
  3. Click to clear the Include Windows logon domain check box (if it is selected), and then click OK.
  4. Click Dial.
    • If this procedure resolves the issue, and you can establish a dial-up connection; you do not need to follow the remaining steps in this article.
    • If this does not resolve the issue, and you cannot establish a dial-up connection, go to step 5 to further troubleshoot this issue.
  5. In the Connect dialog box, verify that your user name and password are correctly typed in the User name and Password boxes, and then click Dial.
    • If this procedure resolves the issue, and you can establish a dial-up connection; you do not need to follow the remaining steps in this article.
    • If this does not resolve the issue, and you cannot establish a dial-up connection, go to step 6 to further troubleshoot this issue.
  6. Click Start, point to Connect To, and then click your dial-up connection.
  7. In the Connect dialog box, click Properties.
  8. Click the Security tab.
  9. Under Security options, click Allow unsecured password in the Validate my identity as follows box, and then click OK.

MORE INFORMATION

For additional information about how to create a dial-up connection in Windows XP, click the article numbers below to view the articles in the Microsoft Knowledge Base:

305549  HOW TO: Configure a Connection to the Internet in Windows XP Professional
308522  Description of the Network Setup Wizard in Windows
284269  HOW TO: Save and Restore Dial-up Connections
APPLIES TO
  • Microsoft Windows XP Home Edition
  • Microsoft Windows XP Professional

For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

Join us on facebook

http://www.facebook.com/pages/Compfaqz/178832208817415

Fix Your PC Error 0x000000D1

Windows XP SP2 – stop error code 0x000000D1


  • When you switch your Windows XP Service Pack 2 (SP2) portable computer from AC (utility) power to DC (battery) power, or vice versa, you may get the error below:

    STOP 0x000000D1 (0x0000000C, 0x000000020x00000000, 0xF8E26A89)
    gv3.sys – Address F8E26A89 base at F8E26000, Datestamp 3dd991eb
  • How to fix?Restore your processor driver to the correct driver. The correct driver, Intelppm.sys, was included with Windows XP SP2.

    To determine which processor driver is installed, following steps:

    1. Click Start, click Run, type devmgmt.msc, and then press ENTER.

    2. In Device Manager, expand Processors.

    3. Right-click Intel Pentium M processor, and then click Properties.

    4. Click the Driver tab.

    5. Click Driver Details.

    If your Windows XP SP2 system is using the Gv3.sys processor driver, you must update to the Intelppm.sys processor driver to correct this problem. To do this, following steps:

    1. Click Start, click Run, type devmgmt.msc, and then press ENTER.

    2. In Device Manager, expand Processors.

    3. Right-click Intel Pentium M processor, and then click Update Driver.
    The Driver Update Wizard will start.

    4. If you are prompted Can Windows connect to Windows Update to search for software?, clickNo, not at this time, and then click Next.

    5. Click Install the software automatically (Recommended), and then click Next.

    6. Click Finish.

    You must restart your computer to complete the installation.

Microsoft help links for error 0x000000D1


PC repair tool to fix code 0x000000D1


  • If you still haven’t fixed the windows xp 0x000000D1 problem:1. Please try the tool windows registry optimizer, it safely cleans PC errors & invalid entries cause slow speed, blue screen, deadlock errors and crashing, and repair registry problems to speedup your computer performances. It is easy to use. And you can scan your PC for free first!

    2. Some pc error is related to driver problems, Driver Update software is designed to quickly locate the most current drivers specific to your computer system, you can run a free scan for your pc driver update first.

source – windowsxpregistrycleaner.com

For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

Join us on facebook

http://www.facebook.com/pages/Compfaqz/178832208817415

Fix Your PC Error 10000050

Windows XP – blue screen error code 10000050


  • When you run your windows xp system, you may get the blue screen error below:

    BCCode : 10000050 BCP1 : BAD0B148 BCP2 : 00000000 BCP3 : 805BB442
    BCP4 : 00000002 OSVer : 5_1_2600 SP : 3_0 Product : 256_1
  • How to fix?Step 1:

    First we will try to disable automatic restart so that we get the complete error.

    To disable automatic restart on system failure, boot into advanced startup options and select ‘Disable automatic restart on system failure’ and hit enter.

    How to boot into advanced startup options?

    Step 2:

    Disable Antivirus\Firewall temporarily and then check for the issue.

    Note: Please make sure that you enable the antivirus software\firewall after performing the test to keep your computer protected.

    Turn Windows Firewall on or off

    Disable antivirus software

Microsoft help links for error 10000050


PC repair tool to fix code 10000050
  • If you still haven’t fixed the windows xp 10000050 problem:1. Please try the tool windows registry optimizer, it safely cleans PC errors & invalid entries cause slow speed, blue screen, deadlock errors and crashing, and repair registry problems to speedup your computer performances. It is easy to use. And you can scan your PC for free first!

    2. Some pc error is related to driver problems, Driver Update software is designed to quickly locate the most current drivers specific to your computer system, you can run a free scan for your pc driver update first.

    source – windowsxpregistrycleaner.com

    For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

    Join us on facebook

    http://www.facebook.com/pages/Compfaqz/178832208817415


Fix Your XP Error 0x0000008e

Windows XP – setup error code 0x0000008e


  • When you install Winxp system, you may get the stop error below while the setup program running:

    STOP 0x0000008e
    STOP 0x00000050 PAGE_FAULT_IN_NON_PAGED_AREA
     “

  • How to fix?

    1. Remove some of the memory modules that are installed on the computer. Leave at least the RAM that is required for the computer to start and run Windows XP.

    The recommended RAM to run Windows XP is 128 megabytes (MB). The minimum is 64 MB, and the maximum is 4 gigabytes.

    Example: if two 256-MB memory modules are installed on your computer, remove one of the memory modules.

    2. Restart your computer, and then run the Setup program:

    a. Insert the Windows XP Setup CD-ROM in the CD-ROM drive, start the computer, and then click OKto select the first option screen to install a copy of Windows XP.

    b. Click Accept, and then follow the instructions on the screen to complete the Windows XP installation.

    3. If you again receive the error message that is mentioned in the above box error, go to step 4.

    4. Remove a different memory module, or install the RAM in a different memory slot.

    5. Restart your computer, and then rerun Setup.

    You may have to restart your computer several times to identify the specific memory modules that are not working correctly.

Microsoft help links for error 0x0000008e


PC repair tool to fix code 0x0000008e


  • If you still haven’t fixed the windows xp 0x0000008e problem:

    1. Please try the tool windows registry optimizer, it safely cleans PC errors & invalid entries cause slow speed, blue screen, deadlock errors and crashing, and repair registry problems to speedup your computer performances. It is easy to use. And you can scan your PC for free first!

    2. Some pc error is related to driver problems, Driver Update software is designed to quickly locate the most current drivers specific to your computer system, you can run a free scan for your pc driver update first.

    source – windowsxpregistrycleaner.com

    For any questions, queries please do not hesitate to leave a comment in the queries page at the bottom of the page or contact us at compfaqz@gmail.com

    Join us on facebook

    http://www.facebook.com/pages/Compfaqz/178832208817415